Yale SmartHome Alarm series Especificações descarregar pdf (Página 2)

Y ale

ale

Text Display

Location planning

Home and Away Mode Planning

The home arming mode allows the premises to be

part armed so that no one can get inside without

warning the occupier, yet the person already inside

the house can move freely without triggering the

alarm. For example the downstairs of a house can

be armed while upstairs can be disarmed allowing

the user to go to bed without causing an alarm.

If this feature is to be used, then it should be

planned now, before installation.

Decide what areas can be occupied when in home

arming mode, the sensors for these areas should be

ignored using the “Home-arm set” option (see page

11); and the sensors activated on the path to access

the control unit should be to be set to either Entry or

Away Entry as explained in Chapter 5.

Operating Range

All devices must be within 30 metres of the control

unit and must not be mounted on or near large

metal objects. Avoid obvious sources of electrical

interference such as fridges and microwave ovens.

Tamper Switches

When mounting devices ensure that any tamper

switches close fully. On uneven surfaces it may be

necessary to place packing behind the switch for

reliable operation.

Extend The System

Extend the system in the future to increase your

security or as your needs change.

For example, add extra PIR detectors and

extra door/window contacts.

Choosing Location

To minimise interference, avoid locating devices

close to metal framework, glass, electrical

appliances (especially wireless devices) and electric

cables.

Please note that the present of high density material

(metal, glass etc) in the transmission path will

signiﬁcantly reduce the wireless transmission range.

Work out the best places to locate the devices for maximum protection. Having chosen the

locations do not mount at this stage.

Keypad remote control accessory

When used as second keypad, it is ideal in

bedrooms or at the top of a stairwell so the

ground ﬂoor can be armed when going to bed

for the night. Or, at a side or back door for

alternative entry.

•Mountatchestheightforeaseofuse

•Designedforindooruseonly

•Keypadshouldbeaccessiblefromaprotected

entry/exit point

•Ensurethatthekeypadisnotvisiblefromthe

outside of the premises.

PIR movement detector

•Mountinapositionsuchthatanintruderwould

normally move across the PIRs ﬁeld of view.

•Heightshouldbebetween1.9and2metres

above ﬂoor level.

•Locationinacornerwillensurewiderroom

coverage.

•DonotmountthePIRwhereitseldofviewwill

be obstructed e.g. by curtains, ornaments etc.

•Donotpointdirectlyatsourcesofheate.g.res

or boilers, and do not position directly above

radiators.

•AvoidmountingthePIRdirectlyfacinga

window.

•DonotpointthePIRatadoorprotectedbya

door/window contact.

Help button accessory

The help button provides extra protection for you

and your family. When help is needed the button

can activate your alarm immediately - even when

the system is disarmed.

•Mountonatwallsurface

•Designedforindooruseonly

•Outofreachofchildren

•Hiddenfromviewwhileeasilyaccessible.

1 2 3 4 5 6 7 ... 31 32

Comentários a estes Manuais

Sem comentários

Yale SmartHome Alarm series Especificações Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Yale SmartHome Alarm series